ทำ call pickup ไม่ได้ครับ

Elastix IP Pbx

Moderator: jubjang

ทำ call pickup ไม่ได้ครับ

โพสต์โดย zip » 18 ธ.ค. 2010 16:29

ทำตามบทความ Call Pickup - วิธีการรับสายแทนกันใน Elastix
แล้วมันไม่ดึงให้อะครับ
กด *8 แล้วมันนิ่งเลยนะครับ
หรือต้องไปคอนฟิกเพิ่มที่ตรงไหนบ้างครับ ขอคำแนะนำหน่อยครับ
ขอบคุณมากกครับ
zip
Gold Member
 
โพสต์: 62
ลงทะเบียนเมื่อ: 18 ธ.ค. 2010 14:47

Re: ทำ call pickup ไม่ได้ครับ

โพสต์โดย nuiz » 18 ธ.ค. 2010 19:01

ถ้าใช้ Elastix
1. ตอนสร้างเบอร์ Extension เซ็ต Callgroup/Pickupgroup ให้อยู่ใน Group เดียวกัน
2. ดูที่เมนู Feature Codes หา "Asterisk General Call Pickup" ว่า Enable อยู่หรือเปล่า แล้วมีค่าเป็นอะไร ใช่ *8 หรือเปล่า
3. ใส่บรรทัดนี้
featuredigittimeout = 5000
ไว้ในไฟล์ features.conf ใส่ไว้ล่าง [general] ตัวอย่างครับ

[general]
featuredigittimeout = 5000
#include features_general_additional.conf
#include features_general_custom.conf

3. ถ้ายังไม่เวอร์คให้เข้า Asterisk Console แล้วก็อปข้อความขณะที่มีการดึงสาย ถ้าเห็นข้อความ Error ก็พอจะรู้สาเหตุ
** หากมีปัญหากับอุปกรณ์ที่ซื้อมาเองหรือบริการที่ทำขึ้นมาเอง ให้โพสต์ถามในเว็บบอร์ดนี้นะครับ **
** งานเร่งด่วนติดต่อว่าจ้างที่เบอร์ 08-5161-9439 อีเมล์ iamaladin@gmail.com ไลน์ NuizVoip ครับ **
nuiz
Diamond Member
 
โพสต์: 6999
ลงทะเบียนเมื่อ: 24 มี.ค. 2010 09:33

Re: ทำ call pickup ไม่ได้ครับ

โพสต์โดย zip » 20 ธ.ค. 2010 18:21

1. ทำให้อยู่ใน Group เดียวกันแล้วครับ
2.เช็คแล้วตรงครับ *8 และ Enable ไว้แล้ว
3. เพิ่มลงไปแล้วครับ

ลองแล้วก็เหมือนเดิมครับ กด *8 ก็เงียบเลยครับ *8# ก็นิ่งเลยครับ

ผมลง elastix เวอร 2.0 นะครับ

ส่วนนี้เป็นข้อความจาก Asterisk Console ครับ
ไม่รู้หมือนกันครับว่า เช็ตบรรทัดไหน รบกวนช่วยดูให้หน่อยครับ
Asterisk 1.6.2.10, Copyright (C) 1999 - 2010 Digium, Inc. and others.
Created by Mark Spencer <markster@digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
Connected to Asterisk 1.6.2.10 currently running on ippbxvg (pid = 2794)
Verbosity is at least 3
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
-- Executing [1102@from-internal:1] Macro("SIP/1207-00000047", "exten-vm,novm,1102") in new stack
-- Executing [s@macro-exten-vm:1] Macro("SIP/1207-00000047", "user-callerid,") in new stack
-- Executing [s@macro-user-callerid:1] Set("SIP/1207-00000047", "AMPUSER=1207") in new stack
-- Executing [s@macro-user-callerid:2] GotoIf("SIP/1207-00000047", "0?report") in new stack
-- Executing [s@macro-user-callerid:3] ExecIf("SIP/1207-00000047", "1?Set(REALCALLERIDNUM=1207)") in new stack
-- Executing [s@macro-user-callerid:4] Set("SIP/1207-00000047", "AMPUSER=1207") in new stack
-- Executing [s@macro-user-callerid:5] Set("SIP/1207-00000047", "AMPUSERCIDNAME=test2") in new stack
-- Executing [s@macro-user-callerid:6] GotoIf("SIP/1207-00000047", "0?report") in new stack
-- Executing [s@macro-user-callerid:7] Set("SIP/1207-00000047", "AMPUSERCID=1207") in new stack
-- Executing [s@macro-user-callerid:8] Set("SIP/1207-00000047", "CALLERID(all)="test2" <1207>") in new stack
-- Executing [s@macro-user-callerid:9] ExecIf("SIP/1207-00000047", "0?Set(CHANNEL(language)=)") in new stack
-- Executing [s@macro-user-callerid:10] GotoIf("SIP/1207-00000047", "0?continue") in new stack
-- Executing [s@macro-user-callerid:11] Set("SIP/1207-00000047", "__TTL=64") in new stack
-- Executing [s@macro-user-callerid:12] GotoIf("SIP/1207-00000047", "1?continue") in new stack
-- Goto (macro-user-callerid,s,19)
-- Executing [s@macro-user-callerid:19] NoOp("SIP/1207-00000047", "Using CallerID "test2" <1207>") in new stack
-- Executing [s@macro-exten-vm:2] Set("SIP/1207-00000047", "RingGroupMethod=none") in new stack
-- Executing [s@macro-exten-vm:3] Set("SIP/1207-00000047", "VMBOX=novm") in new stack
-- Executing [s@macro-exten-vm:4] Set("SIP/1207-00000047", "EXTTOCALL=1102") in new stack
-- Executing [s@macro-exten-vm:5] Set("SIP/1207-00000047", "CFUEXT=") in new stack
-- Executing [s@macro-exten-vm:6] Set("SIP/1207-00000047", "CFBEXT=") in new stack
-- Executing [s@macro-exten-vm:7] Set("SIP/1207-00000047", "RT=""") in new stack
-- Executing [s@macro-exten-vm:8] Macro("SIP/1207-00000047", "record-enable,1102,IN") in new stack
-- Executing [s@macro-record-enable:1] GotoIf("SIP/1207-00000047", "1?check") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s@macro-record-enable:4] ExecIf("SIP/1207-00000047", "0?MacroExit()") in new stack
-- Executing [s@macro-record-enable:5] GotoIf("SIP/1207-00000047", "0?Group:OUT") in new stack
-- Goto (macro-record-enable,s,15)
-- Executing [s@macro-record-enable:15] GotoIf("SIP/1207-00000047", "1?IN") in new stack
-- Goto (macro-record-enable,s,20)
-- Executing [s@macro-record-enable:20] ExecIf("SIP/1207-00000047", "0?MacroExit()") in new stack
-- Executing [s@macro-record-enable:21] NoOp("SIP/1207-00000047", "Recording enable for 1102") in new stack
-- Executing [s@macro-record-enable:22] Set("SIP/1207-00000047", "CALLFILENAME=20101220-175621-1292842581.71") in new stack
-- Executing [s@macro-record-enable:23] MixMonitor("SIP/1207-00000047", "20101220-175621-1292842581.71.wav,,") in new stack
-- Executing [s@macro-record-enable:24] Set("SIP/1207-00000047", "CDR(userfield)=audio:20101220-175621-1292842581.71.wav") in new stack
-- Executing [s@macro-record-enable:25] MacroExit("SIP/1207-00000047", "") in new stack
-- Executing [s@macro-exten-vm:9] Macro("SIP/1207-00000047", "dial,,tr,1102") in new stack
-- Executing [s@macro-dial:1] GotoIf("SIP/1207-00000047", "1?dial") in new stack
-- Goto (macro-dial,s,3)
-- Executing [s@macro-dial:3] AGI("SIP/1207-00000047", "dialparties.agi") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
== Begin MixMonitor Recording SIP/1207-00000047
dialparties.agi: Starting New Dialparties.agi
dialparties.agi: Caller ID name is 'test2' number is '1207'
dialparties.agi: Methodology of ring is 'none'
-- dialparties.agi: Added extension 1102 to extension map
-- dialparties.agi: Extension 1102 cf is disabled
-- dialparties.agi: Extension 1102 do not disturb is disabled
dialparties.agi: EXTENSION_STATE: 0 (NOT_INUSE)
dialparties.agi: Extension 1102 has ExtensionState: 0
-- dialparties.agi: Checking CW and CFB status for extension 1102
-- dialparties.agi: dbset CALLTRACE/1102 to 1207
-- dialparties.agi: Filtered ARG3: 1102
-- <SIP/1207-00000047>AGI Script dialparties.agi completed, returning 0
-- Executing [s@macro-dial:7] Dial("SIP/1207-00000047", "SIP/1102,,tr") in new stack
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
-- Called 1102
-- SIP/1102-00000048 is ringing
== Spawn extension (macro-dial, s, 7) exited non-zero on 'SIP/1207-00000047' in macro 'dial'
== Spawn extension (macro-exten-vm, s, 9) exited non-zero on 'SIP/1207-00000047' in macro 'exten-vm'
== Spawn extension (from-internal, 1102, 1) exited non-zero on 'SIP/1207-00000047'
-- Executing [h@from-internal:1] Macro("SIP/1207-00000047", "hangupcall") in new stack
-- Executing [s@macro-hangupcall:1] GotoIf("SIP/1207-00000047", "1?noautomon") in new stack
-- Goto (macro-hangupcall,s,3)
-- Executing [s@macro-hangupcall:3] NoOp("SIP/1207-00000047", "TOUCH_MONITOR_OUTPUT=") in new stack
-- Executing [s@macro-hangupcall:4] GotoIf("SIP/1207-00000047", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,7)
-- Executing [s@macro-hangupcall:7] GotoIf("SIP/1207-00000047", "1?skipblkvm") in new stack
-- Goto (macro-hangupcall,s,10)
-- Executing [s@macro-hangupcall:10] GotoIf("SIP/1207-00000047", "1?theend") in new stack
-- Goto (macro-hangupcall,s,12)
-- Executing [s@macro-hangupcall:12] Hangup("SIP/1207-00000047", "") in new stack
== Spawn extension (macro-hangupcall, s, 12) exited non-zero on 'SIP/1207-00000047' in macro 'hangupcall'
== Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/1207-00000047'
== End MixMonitor Recording SIP/1207-00000047
ippbxvg*CLI>
Disconnected from Asterisk server
[root@ippbxvg ~]#


คือ เบอร์ 1207 โทรไปหา 1102
แล้วใช้เบอร์ 1208 ในการดึงสายนะครับ

ขอบคุณสำหรับคำแนะนำครับ
zip
Gold Member
 
โพสต์: 62
ลงทะเบียนเมื่อ: 18 ธ.ค. 2010 14:47

Re: ทำ call pickup ไม่ได้ครับ

โพสต์โดย nuiz » 20 ธ.ค. 2010 18:30

อืม นั่งไล่ message ไปๆมาๆ สองสามครั้ง ก็ไม่เห็นว่ามีใครกด *8 เข้ามาเลยครับ
มีแต่เบอร์ 1102 สัญญาณดัง (is ringing) แล้วเบอร์ 1207 ก็วางสายไป

ทั้ง 3 เบอร์เรียกกันได้ปกติใช่ป่าวครับ ลองสลับกันเรียกและสลับกันดึงสายดูครับ

แล้วก็เช็คว่าทั้ง 3 เบอร์นี้ Asterisk มองเห็นว่าเป็น group เดียวกันหรือเปล่า
เข้า Asterisk Console แล้วพิมพ์คำสั่งนี้ครับ

sip show peer 1102
sip show peer 1207
sip show peer 1208
show features

แล้วก็โพสต์มาครับ
** หากมีปัญหากับอุปกรณ์ที่ซื้อมาเองหรือบริการที่ทำขึ้นมาเอง ให้โพสต์ถามในเว็บบอร์ดนี้นะครับ **
** งานเร่งด่วนติดต่อว่าจ้างที่เบอร์ 08-5161-9439 อีเมล์ iamaladin@gmail.com ไลน์ NuizVoip ครับ **
nuiz
Diamond Member
 
โพสต์: 6999
ลงทะเบียนเมื่อ: 24 มี.ค. 2010 09:33

Re: ทำ call pickup ไม่ได้ครับ

โพสต์โดย zip » 21 ธ.ค. 2010 08:02

ทุกเบอร์โทรหากันได้ครับ
ลองสลับกันดึงสายแล้ว มันก็นิ่งๆนะครับ
ไม่มีทีท่าว่าจะมีสัญญาณวิ่งเข้ามาเลย

ส่วนนี่เป็นคำสั่งที่ลองพิพ์ดูนะครับ
Asterisk 1.6.2.10, Copyright (C) 1999 - 2010 Digium, Inc. and others.
Created by Mark Spencer <markster@digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
Connected to Asterisk 1.6.2.10 currently running on ippbxvg (pid = 2794)
Verbosity is at least 3
ippbxvg*CLI> sip show peer 1208


* Name : 1208
Secret : <Set>
MD5Secret : <Not set>
Remote Secret: <Not set>
Context : from-internal
Subscr.Cont. : <Not set>
Language :
AMA flags : Unknown
Transfer mode: open
CallingPres : Presentation Allowed, Not Screened
Callgroup :
Pickupgroup : 6
Mailbox : 1208@default
VM Extension : *97
LastMsgsSent : 32767/65535
Call limit : 50
Dynamic : Yes
Callerid : "device" <1208>
MaxCallBR : 384 kbps
Expire : -1
Insecure : no
Nat : Always
ACL : Yes
T.38 support : No
T.38 EC mode : Unknown
T.38 MaxDtgrm: -1
DirectMedia : No
PromiscRedir : No
User=Phone : No
Video Support: No
Text Support : No
Ign SDP ver : No
Trust RPID : No
Send RPID : No
Subscriptions: Yes
Overlap dial : Yes
DTMFmode : rfc2833
Timer T1 : 500
Timer B : 32000
ToHost :
Addr->IP : (Unspecified) Port 0
Defaddr->IP : 0.0.0.0 Port 5060
Prim.Transp. : UDP
Allowed.Trsp : UDP
Def. Username: 1208
SIP Options : (none)
Codecs : 0xe (gsm|ulaw|alaw)
Codec Order : (ulaw:20,alaw:20,gsm:20)
Auto-Framing : No
100 on REG : No
Status : UNKNOWN
Useragent : X-Lite release 1002tx stamp 29712
Reg. Contact : sip:1208@192.168.5.16:38938;rinstance=22c997cfcb013a4b
Qualify Freq : 60000 ms
Sess-Timers : Accept
Sess-Refresh : uas
Sess-Expires : 1800 secs
Min-Sess : 90 secs
Parkinglot :

ippbxvg*CLI> sip show peer 1102


* Name : 1102
Secret : <Set>
MD5Secret : <Not set>
Remote Secret: <Not set>
Context : from-internal
Subscr.Cont. : <Not set>
Language :
AMA flags : Unknown
Transfer mode: open
CallingPres : Presentation Allowed, Not Screened
Callgroup :
Pickupgroup : 6
Mailbox : 1102@device
VM Extension : *97
LastMsgsSent : 32767/65535
Call limit : 50
Dynamic : Yes
Callerid : "device" <1102>
MaxCallBR : 384 kbps
Expire : -1
Insecure : no
Nat : Always
ACL : Yes
T.38 support : No
T.38 EC mode : Unknown
T.38 MaxDtgrm: -1
DirectMedia : No
PromiscRedir : No
User=Phone : No
Video Support: No
Text Support : No
Ign SDP ver : No
Trust RPID : No
Send RPID : No
Subscriptions: Yes
Overlap dial : Yes
DTMFmode : rfc2833
Timer T1 : 500
Timer B : 32000
ToHost :
Addr->IP : (Unspecified) Port 0
Defaddr->IP : 0.0.0.0 Port 5060
Prim.Transp. : UDP
Allowed.Trsp : UDP
Def. Username: 1102
SIP Options : (none)
Codecs : 0xe (gsm|ulaw|alaw)
Codec Order : (ulaw:20,alaw:20,gsm:20)
Auto-Framing : No
100 on REG : No
Status : UNKNOWN
Useragent : X-Lite release 1002tx stamp 29712
Reg. Contact : sip:1102@192.168.5.62:61652;rinstance=78f47fefdea87447
Qualify Freq : 60000 ms
Sess-Timers : Accept
Sess-Refresh : uas
Sess-Expires : 1800 secs
Min-Sess : 90 secs
Parkinglot :

ippbxvg*CLI> sip show peer 1207


* Name : 1207
Secret : <Set>
MD5Secret : <Not set>
Remote Secret: <Not set>
Context : from-internal
Subscr.Cont. : <Not set>
Language :
AMA flags : Unknown
Transfer mode: open
CallingPres : Presentation Allowed, Not Screened
Callgroup :
Pickupgroup : 6
Mailbox : 1207@device
VM Extension : *97
LastMsgsSent : 32767/65535
Call limit : 50
Dynamic : Yes
Callerid : "device" <1207>
MaxCallBR : 384 kbps
Expire : -1
Insecure : no
Nat : Always
ACL : Yes
T.38 support : No
T.38 EC mode : Unknown
T.38 MaxDtgrm: -1
DirectMedia : No
PromiscRedir : No
User=Phone : No
Video Support: No
Text Support : No
Ign SDP ver : No
Trust RPID : No
Send RPID : No
Subscriptions: Yes
Overlap dial : Yes
DTMFmode : rfc2833
Timer T1 : 500
Timer B : 32000
ToHost :
Addr->IP : (Unspecified) Port 0
Defaddr->IP : 0.0.0.0 Port 5060
Prim.Transp. : UDP
Allowed.Trsp : UDP
Def. Username: 1207
SIP Options : (none)
Codecs : 0xe (gsm|ulaw|alaw)
Codec Order : (ulaw:20,alaw:20,gsm:20)
Auto-Framing : No
100 on REG : No
Status : UNKNOWN
Useragent : X-Lite release 1002tx stamp 29712
Reg. Contact : sip:1207@192.168.5.77:7718;rinstance=8f4cf3f2042a6325
Qualify Freq : 60000 ms
Sess-Timers : Accept
Sess-Refresh : uas
Sess-Expires : 1800 secs
Min-Sess : 90 secs
Parkinglot :



ก็อยู๋ในกรุปเดียวกันนะครับ

ส่วนคำสั่ง show features มันขึ้นว่า
No such command 'sip show features


ผมคิดว่าน่าจะเป็นโค้ดใน feature.conf ใช่มั้ยครับ

;--------------------------------------------------------------------------------;
; Do NOT edit this file as it is auto-generated by FreePBX. All modifications to ;
; this file must be done via the web gui. There are alternative files to make ;
; custom modifications, details at: http://freepbx.org/configuration_files ;
;--------------------------------------------------------------------------------;
;
; This file is part of FreePBX.
;
; FreePBX is free software: you can redistribute it and/or modify
; it under the terms of the GNU General Public License as published by
; the Free Software Foundation, either version 2 of the License, or
; (at your option) any later version.
;
; FreePBX is distributed in the hope that it will be useful,
; but WITHOUT ANY WARRANTY; without even the implied warranty of
; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
; GNU General Public License for more details.
;
; You should have received a copy of the GNU General Public License
; along with FreePBX. If not, see <http://www.gnu.org/licenses/>.
;
; Copyright (C) 2004 Coalescent Systems Inc (Canada)
; Copyright (C) 2006 Why Pay More 4 Less Pty Ltd (Australia)
; Copyright (C) 2007 Astrogen LLC (USA)

[general]
featuredigittimeout = 5000
#include features_general_additional.conf
#include features_general_custom.conf


[applicationmap]
#include features_applicationmap_additional.conf
#include features_applicationmap_custom.conf

[featuremap]
#include features_featuremap_additional.conf
#include features_featuremap_custom.conf


ขอบคุณสำหรับคำแนะนำครับ
zip
Gold Member
 
โพสต์: 62
ลงทะเบียนเมื่อ: 18 ธ.ค. 2010 14:47

Re: ทำ call pickup ไม่ได้ครับ

โพสต์โดย nuiz » 21 ธ.ค. 2010 10:33

ผมดูแต่ละ Extension แล้ว ทุกเบอร์จะมีแบบนี้เหมือนกันหมด

Callgroup :
Pickupgroup : 6

มันไม่มี Callgroup หน่ะครับ ลองใส่ดูตัวเลขอะไรก็ได้ เช่น 1 ใส่ให้เหมือนกันทั้ง 3 เบอร์ แต่ผมไม่ชัวร์ว่ามันจะแก้ปัญหาได้ พอดีว่าตอนที่ใช้งานอยู่ผมใส่เข้าไปทั้ง 2 อันเลย

ส่วนคำสั่ง show features เครื่องที่ผมลองอยู่นี้เป็น Elastix 1.3 + Asterisk 1.4.22 มันโชว์แบบนี้ จะเห็นว่ามี Pickup อยู่ด้วย โค๊ดที่กดคือ *8

โค้ด: เลือกทั้งหมด
sip*CLI> show features
Builtin Feature           Default Current
---------------           ------- -------
Pickup                    *8      *8     
Blind Transfer            #       ##     
Attended Transfer                 *2     
One Touch Monitor                 *1     
Disconnect Call           *       **     
Park Call                               

Dynamic Feature           Default Current
---------------           ------- -------
(none)

Call parking
------------
Parking extension   :   700
Parking context     :   parkedcalls
Parked call extensions: 701-750

สำหรับ Elastix 2.0 มันเป็น Asterisk 1.6.2 คำสั่งจะเปลี่ยนไปเป็น features show ครับ สลับกัน

ทริก

อืม อีกปัญหานึง เกิดจากอุปกรณ์ที่ใช้เทสหน่ะครับ ไม่ทราบว่าใช้อุปกรณ์อะไรยี่ห้ออะไร เพราะผมเคยเจอว่าอุปกรณ์บางยี่ห้อเรากด * นำหน้าไม่ได้ มันจะตัดออกไปเลย ทำให้เบอร์ที่ส่งมาไม่มี * มาด้วย ลองกด Feature Codes อื่นๆดูครับว่าอันที่ขึ้นต้นด้วย * นี่กดได้หรือเปล่า

ถ้ามีปัญหาเรื่องกด * นำหน้าไม่ได้ ก็ลองเปลี่ยนเป็นค่าอื่นๆที่ไม่มี * นำหน้า เช่น *8 -> 88 เป็นต้น แก้ไขที่หน้าเว็บ Elastix ได้เลยครับ เมนู Feature Codes หรือไม่ก็ลองดูคอนฟิกในตัวอุปกรณ์ว่าพอจะทำอะไรได้บ้างถ้าหากกด * นำหน้าตัวเลข
** หากมีปัญหากับอุปกรณ์ที่ซื้อมาเองหรือบริการที่ทำขึ้นมาเอง ให้โพสต์ถามในเว็บบอร์ดนี้นะครับ **
** งานเร่งด่วนติดต่อว่าจ้างที่เบอร์ 08-5161-9439 อีเมล์ iamaladin@gmail.com ไลน์ NuizVoip ครับ **
nuiz
Diamond Member
 
โพสต์: 6999
ลงทะเบียนเมื่อ: 24 มี.ค. 2010 09:33

Re: ทำ call pickup ไม่ได้ครับ

โพสต์โดย zip » 28 ธ.ค. 2010 20:13

ผมใช้โปรแกรม x-lite ในการติดกันครับของคอมพิวเตอร์ 3 เครื่อง
ลงคอนฟิกเบอร์ที่กดใช้ดึงจาก *8 เป็น 66 แล้วก็ยังนิ่งครับ
ลองตั้ง callgroup ตามแนะนำแล้วก็ยังนิ่งครับ
ผมตั้งให้ callgroup เป็น 1 pickupgroupเป็น 6
ขอบคุณสำหรับคำแนะนำครับ
zip
Gold Member
 
โพสต์: 62
ลงทะเบียนเมื่อ: 18 ธ.ค. 2010 14:47

Re: ทำ call pickup ไม่ได้ครับ

โพสต์โดย nuiz » 29 ธ.ค. 2010 08:43

โปรแกรม xlite หรือ eyebeam กด * นำหน้าไม่ได้นะครับ ผมเคยลองแล้วไม่เวอร์ค

คงต้องเปลี่ยน *8 เป็นเลขอื่นแล้ว
** หากมีปัญหากับอุปกรณ์ที่ซื้อมาเองหรือบริการที่ทำขึ้นมาเอง ให้โพสต์ถามในเว็บบอร์ดนี้นะครับ **
** งานเร่งด่วนติดต่อว่าจ้างที่เบอร์ 08-5161-9439 อีเมล์ iamaladin@gmail.com ไลน์ NuizVoip ครับ **
nuiz
Diamond Member
 
โพสต์: 6999
ลงทะเบียนเมื่อ: 24 มี.ค. 2010 09:33

Re: ทำ call pickup ไม่ได้ครับ

โพสต์โดย zip » 29 ธ.ค. 2010 11:36

ลองเปลี่ยนเป็นเบอร์ 66 ที่ไม่ได้ใช้ * นำหน้าแล้วก็ยังนิ่งนะครับ
แต่ตอนที่ตั้งค่า chanspy ว่าให้กด *67 แล้วโทรออกก็สามารถทำได้นะครับ ดักฟังได้
แต่เวลาดึงสายนี่ นิ่งเลยครับ พอลองกดโทรออกดู โปรแกรมก็ฟ้องว่า call failed : Unavailable อะครับ
รึว่าต้องไปแก้ที่ dial phan ด้วยรึป่าวครับ
zip
Gold Member
 
โพสต์: 62
ลงทะเบียนเมื่อ: 18 ธ.ค. 2010 14:47

Re: ทำ call pickup ไม่ได้ครับ

โพสต์โดย nuiz » 29 ธ.ค. 2010 21:01

อืม ตอนกด 66 ยังไม่มีอะไรขึ้นมาบน Asterisk Console ใช่ป่าวครับ

ส่วน Unavailable บนตัวที่ใช้ลองนี่ น่าจะเป็น 503 Service Unavailable ส่งมาจาก Asterisk หน่ะครับ น่าจะมี Message มาบ้างแล้วนะครับ

เอ่อ...ใช้ Asterisk แท้ๆ หรือว่า FreePBX หรือว่า Elastix อ่ะครับ
** หากมีปัญหากับอุปกรณ์ที่ซื้อมาเองหรือบริการที่ทำขึ้นมาเอง ให้โพสต์ถามในเว็บบอร์ดนี้นะครับ **
** งานเร่งด่วนติดต่อว่าจ้างที่เบอร์ 08-5161-9439 อีเมล์ iamaladin@gmail.com ไลน์ NuizVoip ครับ **
nuiz
Diamond Member
 
โพสต์: 6999
ลงทะเบียนเมื่อ: 24 มี.ค. 2010 09:33

ต่อไป

ย้อนกลับไปยัง Elastix - Unified Communications Software

ผู้ใช้งานขณะนี้

กำลังดูบอร์ดนี้: ไม่มีสมาชิกใหม่ และ บุคคลทั่วไป 3 ท่าน