หน้า 1 จากทั้งหมด 2

หน้าตาของโปรแกรม Elastix - Fax

โพสต์โพสต์แล้ว: 12 ธ.ค. 2009 01:58
โดย voip4share
หากคุณกำลังมองหา Fax Server ที่เอาไปใช้งานได้ฟรีๆ แถมยังส่งแฟ็กซ์ไปยังอีเมล์ได้ด้วย (Fax to Mail) โปรแกรม Elastix คือคำตอบครับ ก่อนอื่นมาดูก่อนว่ามีเมนูอะไรบ้าง

1. เมนู "Fax -> Virtual Fax List"
fax_virtual_fax_list_70.png
Fax -> Virtual Fax List
fax_virtual_fax_list_70.png (40.6 KiB) เปิดดู 11707 ครั้ง


2. เมนู "Fax -> New Virtual Fax"
fax_new_virtual_fax_70.png
Fax -> New Virtual Fax
fax_new_virtual_fax_70.png (40.2 KiB) เปิดดู 11707 ครั้ง


3. เมนู "Fax -> Fax Master"
fax_fax_master_70.png
Fax -> Fax Master
fax_fax_master_70.png (40.83 KiB) เปิดดู 11707 ครั้ง


4. เมนู "Fax -> Fax Clients"
fax_fax_clients_70.png
Fax -> Fax Clients
fax_fax_clients_70.png (45.46 KiB) เปิดดู 11707 ครั้ง


5. เมนู "Fax -> Fax Visor"
fax_fax_visor_70.png
Fax -> Fax Visor
fax_fax_visor_70.png (40.07 KiB) เปิดดู 11707 ครั้ง


6. เมนู "Fax -> Template Email"
fax_template_email_70.png
Fax -> Template Email
fax_template_email_70.png (49.74 KiB) เปิดดู 11707 ครั้ง

Re: หน้าตาของโปรแกรม Elastix - Fax

โพสต์โพสต์แล้ว: 17 ม.ค. 2010 16:18
โดย voip4share
ขอข้อมูลเพิ่มเติมอีกสักนิดหน่อยครับ
1 แฟ็กซ์ความร้อนเครื่องนี้เวลาเอาไปต่อกับเบอร์ธรรมดา มันรับส่งได้ปกติหรือเปล่าครับ
2 แฟ็กซ์ไปที่ไหนครับ ต้นทาง ปลายทาง ระหว่าง voip-pstn หรือว่า voip-voip หรือว่า pstn-voip-pstn
3 ตอนที่แฟ็กซ์ผ่าน asterisk ใช้ fax แบบไหนครับ แบบ G.711 passthrough หรือว่าใช้ T.38
4 ใช้ asterisk เวอร์ชั่นอะไรครับ
5 ใช้ sip หรือว่า iax2
6 ในไฟล์ sip.conf หรือ iax.conf คอนฟิกไว้ยังไงบ้าง

ขอเท่านี้ก่อนครับ

Re: หน้าตาของโปรแกรม Elastix - Fax

โพสต์โพสต์แล้ว: 26 ม.ค. 2010 15:15
โดย hor1440
1 แฟ็กซ์ความร้อนเครื่องนี้เวลาเอาไปต่อกับเบอร์ธรรมดา มันรับส่งได้ปกติหรือเปล่าครับ
ถ้าต่อกับเครื่อง Fax ธรรมดาสามารถรับได้ปกติครับ

2 แฟ็กซ์ไปที่ไหนครับ ต้นทาง ปลายทาง ระหว่าง voip-pstn หรือว่า voip-voip หรือว่า pstn-voip-pstn
เป็นเฉพาะเวลาที่รับ Fax ครับตอนส่งไม่มีปัญหา

3 ตอนที่แฟ็กซ์ผ่าน asterisk ใช้ fax แบบไหนครับ แบบ G.711 passthrough หรือว่าใช้ T.38
T.38

4 ใช้ asterisk เวอร์ชั่นอะไรครับ
เป็น Elastix 1.6.12 ครับ

5 ใช้ sip หรือว่า iax2
ลองใช้ทั้ง 2 แบบแล้วครับมีปัญหาเหมือนกัน

6 ในไฟล์ sip.conf หรือ iax.conf คอนฟิกไว้ยังไงบ้าง
Sip.conf
[general]
t38pt_udptl=yes
t38pt_rtp=no
t38pt_tcp=no

Re: หน้าตาของโปรแกรม Elastix - Fax

โพสต์โพสต์แล้ว: 27 ม.ค. 2010 00:32
โดย voip4share
Asterisk 1.6.x ก็รองรับ T.38 แล้วนะครับ ถ้าอย่างนั้นผมคิดว่าน่าจะเป็นปัญหาเรื่อง Error ข้อมูลช่วงที่เกิด Error ก็จะหายไปหน่ะรับ (เกิด packet loss) ลองเพิ่มคุณสมบัติ Error Correction ให้แก่ T.38 ดูครับ คอนฟิกในไฟล์ sip.conf เหมือนเดิม แต่ให้แก้บรรทัด t38pt_udptl=yes ใหม่นะครับ เป็นบรรทัดใดบรรทัดหนึ่งใน 3 บรรทัดต่อไปนี้

t38pt_udptl = yes,fec ; Enables T.38 with FEC error correction.
t38pt_udptl = yes,redundancy ; Enables T.38 with redundancy error correction.

;
; In some cases, T.38 endpoints will provide a T38FaxMaxDatagram value (during T.38 setup) that
; is based on an incorrect interpretation of the T.38 recommendation, and results in failures
; because Asterisk does not believe it can send T.38 packets of a reasonable size to that
; endpoint (Cisco media gateways are one example of this situation). In these cases, during a
; T.38 call you will see warning messages on the console/in the logs from the Asterisk UDPTL
; stack complaining about lack of buffer space to send T.38 FAX packets. If this occurs, you
; can set an override (globally, or on a per-device basis) to make Asterisk ignore the
; T38FaxMaxDatagram value specified by the other endpoint, and use a configured value instead.
; This can be done by appending 'maxdatagram=<value>' to the t38pt_udptl configuration option,
; like this:
;
t38pt_udptl = yes,fec,maxdatagram=400 ; Enables T.38 with FEC error correction and overrides
; ; the other endpoint's provided value to assume we can
; ; send 400 byte T.38 FAX packets to it

ลองดูครับเผื่อจะช่วยได้ ถ้ายังไม่เวอร์คก็รบกวนแจ้งมาด้วยครับ จะได้หาต่อ

นี้คือรายละเอียดของ FEC (Forward Error Correction) ครับ

Re: หน้าตาของโปรแกรม Elastix - Fax

โพสต์โพสต์แล้ว: 27 ม.ค. 2010 16:24
โดย hor1440
ยังเป็นเหมือนเดิมครับ ลองทั้ง 3 วิธีแล้ว ผมแนบตัวอย่าง Fax ที่รับเข้ามาให้ดูครับ

Re: หน้าตาของโปรแกรม Elastix - Fax

โพสต์โพสต์แล้ว: 27 ม.ค. 2010 17:22
โดย voip4share
อาจจะเป็นปัญหาที่ไดร์ฟเวอร์ T.38 ก็ได้ครับ
ลองเข้าไปดูที่กระทู้นี้ดูครับ http://www.thaibsd.com/webboard/show.ph ... k&No=18614 อาจช่วยได้

Re: หน้าตาของโปรแกรม Elastix - Fax

โพสต์โพสต์แล้ว: 22 มี.ค. 2010 11:16
โดย NnNz
ผมใช้ตัว Trixbox อยู่ สามารถส่ง fax แบบตัว Elastix นี้ได้หรือไม่ครับ

Re: หน้าตาของโปรแกรม Elastix - Fax

โพสต์โพสต์แล้ว: 22 มี.ค. 2010 12:34
โดย voip4share
ได้ครับ เพราะทั้ง Elastix และ Trixbox ต่างก็ใช้ Asterisk และ FreePBX เหมือนกัน แต่อาจจะมีปัญหากับ T.38 บ้าง อันนี้ขึ้นอยู่กับเวอร์ชั่นของ Asterisk ครับ ซึ่ง Asterisk 1.4 จะรองรับ T.38 Passthrough หมายความว่าทั้งต้นทางและปลายทางต้องรองรับ T.38 เหมือนกัน ส่วน Asterisk 1.6 สามารถใช้งานเป็น T.38 Gateway ได้เลยครับ

พอดีผมไม่เคยเล่น Trixbox นะครับ เลยไม่รู้ว่าใช้ Asterisk เวอร์ชั่นอะไร ถ้าลอง T.38 FAX ไม่เวอร์ค ก็ลอง G.711 Fax Passthrough ดูก็ได้ครับ โดยเซ็ต Codec เบอร์ Extension ของ Fax ให้เป็น ulaw หรือ alaw อย่างใดอย่างหนึ่ง ไม่ต้องให้มี Codec อื่นอีก ส่วนจะโทรออกผ่าน SIP Trunk ก็ให้เพิ่ม Codec alaw หรือ ulaw เข้าไปด้วย

Re: หน้าตาของโปรแกรม Elastix - Fax

โพสต์โพสต์แล้ว: 17 พ.ค. 2010 21:32
โดย nepenthes
ถามเรื่อง Fax หน่อยครับ

ตอนนี้ผมใช้ SIP อย่างเดียว ไม่มีใช้สายโทรศัพท์เลย

ไม่ทราบว่ามันสามารถรับ/ส่ง fax ได้มั้ยครับ

Re: หน้าตาของโปรแกรม Elastix - Fax

โพสต์โพสต์แล้ว: 18 พ.ค. 2010 09:05
โดย nuiz
ทำได้ครับ โดยการขอเบอร์ DID จากผู้ให้บริการ อาจจะเป็น Cat2Call+ ก็ได้ครับ ลองติดต่อไปก็ได้ และถามว่าใช้ Fax ได้มั๊ย ถ้าเบอร์ DID รับส่ง Fax ได้ เราก็จะใช้ Fax ใน Elastix ได้ครับ